Use the Container Generator

Last updated on

Use Container Generator to make a tray or container from a closed outline.

Draw the outline

Start with a template, then move its points. Click a path segment to insert a point. Select a point to adjust its curve or remove it. Use the curve handles for a smoother side or choose a corner for a sharper turn.

Keep the path closed and avoid crossing it over itself. Drawing-view size changes the space you see; check the model's actual dimensions before downloading.

Give it depth

1. Set the height

Set Extrude Height for the height of the container.

2. Set wall and bottom thickness

Set Wall Thickness and Bottom Thickness.

3. Inspect the shape

Turn the 3D preview around. Check tight corners, narrow gaps, and the base.

4. Read Print Check

Read Print Check. If the path crosses itself, move the points apart.

5. Save or download

Save your project or download STL/3MF.

Try a simple project

For a jewelry tray, start with a broad outline and low walls. For a pencil holder, increase the height and check that the base stays stable. Use Undo/Redo while exploring, and keep a copy before making a large change.

See Check and Download for export steps, or Save and Continue to return to your design later.

Make a tray or organizer

Start with a closed outline, then adjust its height, walls, and base.