How to Read an STL Repair Report: Mesh Errors Explained
On This Page
The report compares the mesh before and after repair. A triangle is one small face of the surface.
Understand closed surfaces
An open edge belongs to only one face; a non-manifold edge can join more than two. A closed surface encloses the material volume. A container can have an open top while its wall and bottom surfaces still form a closed mesh. Point-only connections, internal faces, and overlapping shells may also make the intended solid unclear.
What the problems mean
| Problem | What it means | Why it can affect slicing | What PrintVerse may do | Check afterwards |
|---|---|---|---|---|
| Open edges | A surface ends without closing | The slicer may not identify an enclosed solid | Join nearby points or close a gap | Intended openings remain correct |
| Non-manifold edges | Too many faces meet at one edge | The inside and outside can be ambiguous | Separate or reconnect surfaces | Parts still meet as intended |
| Holes | Missing faces leave a gap | Missing boundaries can leave gaps in sliced layers | Fill suitable gaps | No useful opening was filled |
| Duplicate faces | A surface is repeated | Repeated surfaces may create conflicting boundaries | Remove repeated faces | The surface is still complete |
| Collapsed triangles | A face has no useful area | Zero-area faces can leave missing or unstable boundaries | Remove damaged faces | Small details remain |
| Inside-out surfaces | Face directions disagree | The slicer may interpret solid and empty regions incorrectly | Reorient connected shells | Inside and outside look right |
| Overlapping closed parts | Solids occupy the same space | Internal surfaces can produce ambiguous or duplicated regions | Rebuild or merge solids | Separate working parts were not joined |
Match this to the numbers
Compare triangles, open edges, and non-manifold edges before and after. The report also shows holes filled, vertices joined, and faces removed. Duplicate and collapsed faces may be combined in the removed-face count.
Extra results appear only when relevant, such as corrected shells or solid rebuilding. Not every concept has its own counter.
What a clean report does not prove
Zero open edges does not check wall thickness, physical size, material strength, or support needs. Inspect the shape, then check the repaired STL in a slicer.
Having trouble with an STL?
Check and repair common holes, damaged faces, and non-manifold mesh problems.